MANUAL 4 WAY VALVE IF 3/4 - 100lit

Use:

The valve is used as a four-way valve. The flow of oil that passes into the valve through the two inlets is diverted to the two outlets. It can be used for two-stage actuators/cylinders or for reversing the direction of rotation of the hydraulic motor.

Material:

Housing: cast iron, inside hardened metal
Seals: Buna N standard

Connection:

Connect "P" to the pressure side and "A" and "B" to the ports, "T" to the return and "A" and "B" to the actuator/cylinder or hydraulic motor. When the lever is in position "1", "P" is connected to "A" and at one point "B" is emptied into the tank "T". When the lever is in position "2", "P" is connected to "B" and at one "A" is emptied into the tank "T". With the lever in the middle position, all ports are closed (closed center).